Ceramic Fiber Textiles
Adhesive-Backed Fiber Tape
Code prefix ABT
Adhesive-backed fiber tape is the same woven tape with a pressure-sensitive adhesive on one face. The base can be aluminosilicate ceramic tape, bio-soluble tape or glass fiber tape, so the temperature class follows the base fiber. The adhesive is a positioning aid: it holds the tape in place while it is wrapped or laid flat, which matters on overhead work and on surfaces where a stainless clip cannot be fitted first.
- Continuous
- 1000°C
- 1832 °F
- Short peak
- 1260°C
- 2300 °F
- Construction
- Wire reinforced
- ABT
Spec sheets are issued against the confirmed grade, with the test method named on the report.
01 — Product description
Product description
Adhesive-backed high-temperature fiber tape is the above high-temperature fiber tape with a heat-resistant adhesive compounded on one side. The adhesive is only for auxiliary fixing and easier on-site installation; it has no high-temperature performance and will fail and detach at high temperature. Only the base material provides high-temperature insulation and sealing.
The base materials of high-temperature resistant fiber tape include aluminosilicate ceramic fiber tape, biosoluble fiber tape, and fiberglass tape. The conventional installation methods are wrapping and flat laying, suitable for various equipment thermal insulation and sealing installation scenarios.
Product parameters
| Item | Value |
|---|---|
| Color | Natural color of the corresponding high-temperature resistant fiber base material |
| Base material continuous use temperature | 500°C~1000°C (determined by base material) |
| Adhesive backing tolerance temperature | Room-temperature auxiliary fixing, fails at high temperature |
| Width | ≥25mm, customizable |
| Thickness | 2mm, 3mm, 5mm, 6mm, customizable |
Usage precautions
- Cutting, processing, and installation of fiber materials generate fiber dust. Maintain ventilation during operation, wear dust-proof protective equipment, and dispose of waste in accordance with local environmental regulations.
- The adhesive backing is only an auxiliary installation structure. Before the equipment is heated and operated, ensure the product is wrapped and fitted firmly to avoid loosening or detachment after the adhesive backing fails.
- Match the corresponding material of fiber tape according to equipment working temperature and working condition environment. Over-temperature and over-working-condition use are strictly prohibited.
- Regularly inspect product fitting status, wear, and aging. In case of loosening, damage, or failure, replace promptly.
- All technical data are for reference only. Actual performance depends on usage conditions. Users should conduct their own suitability testing and comply with relevant safety regulations and standards.
02 — Characteristics
Positioning, not bonding
The adhesive holds the tape until the wrap or the mechanical fixing is complete; it is not the service joint.
Three base tapes
Ceramic, bio-soluble and glass bases are all available with the backing, each keeping its own temperature class.
Flat or wrapped
The tape is used wound around pipework and laid flat on panels and covers, with the adhesive face on the cold side.
Fast installation
Overhead and confined work is quicker when the tape stays where it is put before the final fixing.
03 — Typical properties
Values typical, confirm against duty
| Test item | Value | Note |
|---|---|---|
| Base tape | Sets the class | |
| Continuous, ceramic | Stainless reinforced base | |
| Short excursion | Ceramic base | |
| Backing | One face | |
| Application | Mechanical fixing still required | |
| Width | Customisable | |
| Thickness | Customisable | |
| Adhesive limit | Fails at high temperature |
04 — Standard sizes
| Product code | Dimensions |
|---|---|
| AT-C | Ceramic base, width and roll length to order |
| AT-AES | Bio-soluble base, width and roll length to order |
| AT-G | Glass base, width and roll length to order |
05 — Where it is used
- Pipe and flange wrapping
- Panel and cover lining
- Door seal positioning
- Duct and vessel lagging
- Overhead installation work
Service limits
- The adhesive is not a high-temperature bond; fit mechanical fixings for service.
- Apply to a clean, dry surface and keep the adhesive face away from the hot side.
- Store rolls flat and cool; the backing film degrades if left in sun.
Related materials
View family
Adhesive-Backed Fiber Tape
ABT